The Intelli-Site CS User Guide manual provides a step-by-step quick and easy programming guide in Section 2 - Getting Started. The manual can be accessed via the software by clicking the Menu button and selecting Documentation and Reporting Mode. Switch to the Manuals tab. Double-click on the User Guide and…
Introduction Programming intercom Master Stations and Substations can be a tedious operation. There are a few tricks and tools built into Intelli-Site that make this process a bit easier and more efficient. Specifically, the door construct feature makes programming simple. Using the door construct means the programmer does not need…
Introduction The thought of programming a project can be intimidating if it is the first time or if it's been a while since attending training. But in reality, Intelli-Site has been written to make project programming simple, straightforward, and elegant. This article will walk you through System Layout, adding Areas,…
Overview This article contains the release notes for Intelli-Site v3.9.62. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Older versions of the signature pad had a special initialization file that the newer versions of the signature pad does not. Intelli-Site is looking for that file to make sure the Workstation is running on a machine with the signature SDK. There needs to be a file named SigPlus.ini in…
Overview This article contains the release notes for Intelli-Site v3.9.61. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.60. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Introduction A keypad can be added to the Compass and MAC hardware. This would allow a reader to require both a card and PIN, allow the cardholder to enter the card number manually, or to set an entry code specific for the door. Needless to say, there are security issues…
To set up auto-logon in Intelli-Site, you will have to add four (4) entries to the Registry to define the username, password, and project, and to enable auto-logon. Where those entries go is different depending on whether the Windows OS is 32- or 64-bit. 1. Open the System control panel.…
The short answer is the distance recommendations vary from reader to reader. Consult the manufacturer for your specific reader. The long answer is it varies from reader to reader and installation to installation because the environment affects cabling as much as the equipment itself does. The theoretical limit for Wiegand…