Overview This article contains the release notes for Intelli-Site v3.9.63. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.62. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Older versions of the signature pad had a special initialization file that the newer versions of the signature pad does not. Intelli-Site is looking for that file to make sure the Workstation is running on a machine with the signature SDK. There needs to be a file named SigPlus.ini in…
Overview This article contains the release notes for Intelli-Site v3.9.61. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.60. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Introduction A keypad can be added to the Compass and MAC hardware. This would allow a reader to require both a card and PIN, allow the cardholder to enter the card number manually, or to set an entry code specific for the door. Needless to say, there are security issues…
To set up auto-logon in Intelli-Site, you will have to add four (4) entries to the Registry to define the username, password, and project, and to enable auto-logon. Where those entries go is different depending on whether the Windows OS is 32- or 64-bit. 1. Open the System control panel.…
Overview This article contains the release notes for Intelli-Site v3.9.58. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
There are several ways to find the firmware version. First, log in to Intelli-Site via the Workstation because the firmware version will appear in the Alarm Queue with a RAM Pass Diagnostics check. Then perform one of the following: Cycle power on the MAC or MLC panel. In the Intelli-Site…
Overview This article contains the release notes for Intelli-Site v3.9.57. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
