Overview This article contains the release notes for Intelli-Site v3.9.62. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.61. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.60. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Introduction A keypad can be added to the Compass and MAC hardware. This would allow a reader to require both a card and PIN, allow the cardholder to enter the card number manually, or to set an entry code specific for the door. Needless to say, there are security issues…
The short answer is the distance recommendations vary from reader to reader. Consult the manufacturer for your specific reader. The long answer is it varies from reader to reader and installation to installation because the environment affects cabling as much as the equipment itself does. The theoretical limit for Wiegand…
Overview This article contains the release notes for Intelli-Site v3.9.57. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Overview This article contains the release notes for Intelli-Site v3.9.56. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.
Introduction A virtual point is an I/O point that is not associated with any physical hardware. It isn't "real", it's "virtual". It behaves like any other I/O point. It can be set to high or low, on or off. But there is no way outside of Intelli-Site to verify it's…
Introduction This is an example of the Compass Panel Status screen that was developed for Intelli-Site CS. It shows all status points for an IRM, IIM or IOM. The following describes the procedure to incorporate this screen into a project in Intelli-Site GS or ES.
