Release Notes Intelli-Site 4.0.37.12
Author: Lori TassinCreated: 02-21-2019 03:56 PMLast Updated: 08-02-2021 02:40 PM

Products to which this article applies

  • Intelli-Site
  • Intelli-Site Lite
  • LiNC-PLUS
  • LiNC-PLUS-Lite
  • MASC
  • MASC Lite

OVERVIEW

This article contains the release notes for Intelli-Site v4.0.37.12.  The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.

This is a maintenance release that improves quality, reliability, and performance.  All users are encouraged to upgrade to this release. 

NEW FEATURES

The following software features were added:

  • The Engine Service and Driver Service Port settings are no longer fixed to 9600 and 9601. You may now set them to any available Port. If the Engine Service is moved from 9600, the settings in the Desktop Client must be adjusted to use the new port number.
  • When generating a Support Package, it is now possible to select to include System Information and/or System Summary data. The user is presented with a Support Package Options dialog. By default, both Include System Information and Include System Summary are checked. Clearing the checkbox will de-select that option and it will not be included in the Support Package.

The following Panels were added or upgraded:

  • NEW! Omron panel

Resolved Issues

The following issues affecting all products have been resolved:

  • Panels
    • Axis Media Control
      • Stretch to Fit and Maintain Aspect Ratio flags are now being used. Understand that if the stream resolution is bigger than the video display, only a portion of the stream will be visible. Much like a hole in the fence does not let you see the whole picture,a smaller video display will not let you see the video whole frame.
    • Digital Watchdog
      • Updated to use the latest version of the VisioForge software libraries
    • MAC
      • The name for MAC-4R panels is now MAC-4R (Legacy). The MAC-4R panel is obsolete and only present for those older sites that have not upgraded their hardware. It is legacy hardware that is no longer supported by the manufacturer.
      • The properties dialog for Inputs and Outputs references the Panel, not the RTU.
    • PCSC
      • General Updates and Fixes
        • The [Apply] button now updates the download required buttons
        • The download required buttons are clearing after a successful download without having to close the Quick Config or Properties dialogs
        • The point names, hidden points, and licensing have been corrected for all panel types
        • Device counts are calculated properly
        • Auto-download Valid Cards is working
        • The Panel Control Screens list the Outputs now as expected.
      • IQ/Ultimate
        • Access assignments for readers 9-12 are now downloading
      • ELV
        • The driver connects now.
        • Floor Groups are now downloading with cards
        • Processor Restart is being sent immediately after floor groups
        • Group Masks are now being sent with floor groups
        • The Floor Group bitmask was reversed. It isn't now.

The following issues specific to Intelli-Site Lite have been resolved:

  • N/A

Below are issues related to specific OEM versions:

  • ResidentGuard
    • The Accutech EULA is now displayed during installation.

Known Limitations

N/A

Products to which this article applies

  • Intelli-Site
  • Intelli-Site Lite
  • LiNC-PLUS
  • LiNC-PLUS-Lite
  • MASC
  • MASC Lite